Decking How To Build
If you have planned the layout properly, constructing a straightforward deck with a single layer should not be too difficult. Always use structurally treated lumber and screws created expressly for the task at hand, and apply two coats of preservative to any surfaces cut or holes drilled. This will ensure that the deck has a long life and is resistant to wear.
For more precise cuts when sawing, utilize the 90-degree guide marker on your saw or a set square; then, sand the cut ends to remove splinters. When drilling, mark out all of the pilot holes so that your fasteners are as exact as they can be. If it turns out that you need to cut a decking board along its length, you can use either a handsaw or a circular saw for the job. Put the board in the deck region where there is the least amount of foot activity, and start placing the deck boards from the opposite end. When cutting or sawing wood, applying preservatives, or any other types of wood treatments, you must wear the necessary protective apparel. This includes gloves, a face mask, and safety goggles.
Where Should I Construct The Deck?
Your deck's purpose will determine its size and location; for example, do you intend to use it as a place for hosting parties, a spot for hosting barbecues, or a place for your children to play? Are you putting it in to compliment other aspects of the landscape, such as the paving or the grass? When selecting a location, make sure that you take into account the size of the decking that you require.
How To Build A Deck Yourself
Choose The Material For Your Deck.
You have the option of purchasing composite or timber decking during the planning process and ordering the materials for your deck. It is essential to give serious consideration to the material that you are going to employ in your project. Even while wood has numerous advantages and is the most popular choice, it must be sanded and stained, oiled, or painted at least once every two years to maintain its appearance. However, a wide array of wood alternatives do not need nearly as much maintenance as wood does.
Preparing the Ground
Before you start, you must ensure that the area supporting your new deck has been properly prepared. It's a job that's not too difficult, but it's important if you want the product to last for a long time.
Clear away any rubbish, loose stones, or large weeds that may be present in the area. Mowing any overgrown grass will make marking your deck and digging the ground much simpler. To create a perimeter around your brand-new deck, use pegs and a builder's line to mark the four corners. To a depth of five centimeters, dig out the ground along your perimeter line with a shovel.
After that, the ground ought to be packed down. Dirt compaction is the best tool for the job, although a tamper should be enough in its place. By laying down an even layer of landscaping fabric, not only will you ensure that grass and weeds do not grow through to your deck, but you will also ensure that water drains properly. Put a layer of gravel on the top of the landscaping fabric to create a solid base for your deck and bring the area where your decking will go back into alignment with the ground.
Build a Deck Frame
A frame, joists, and boards are the components that make up a deck. To start the assembly process, you will first need to construct a straightforward perimeter frame out of structural-grade timber. Take precise measurements, then cut it to the required dimensions for your frame. The most professional-looking finish can be achieved by using coach screws in countersunk holes. Drill holes in the outer piece of timber, ready to receive your screws, as you move clockwise around the frame from one corner to the next.
Align the second piece of wood so that it may be used to form a corner, drill pilot holes through both pieces of wood, and then insert and tighten screws as required. Once construction has been completed on all four corners, the deck frame is complete. Before placing the joists or boards, measure the diagonal of the frame to confirm that it is square.
Lay The Deck Boards
Line up the first board so that it is flush with the perimeter of the frame. The joists should be laid in one direction, and the boards should be opposite. Because wood expands and contracts, you need to leave a gap between each board equal to one-fifth of an inch if you use wood.
Make a mark in the middle of each joist, and then countersink screw holes there. At a minimum, each decking board should have two screws attached per joist. Carry on with the process until the construction of your raised timber deck is complete.
Deck Boards should be Stained and Protected.
Depending on the type of pressure-treated board, it may be possible to let it weather in its natural environment. If you want to prevent the telltale pockmarks characteristic of most pressure-treated wood, you should invest in appearance-grade pressure-treated boards.
Staining and preserving the deck boards with a sealant will make them more durable, regardless of the type of wood used. The combination stain and sealant is applied to the wood using a paint roller frame, a roller cover with a thick nap, and an extension pole.
How Difficult Is It To Construct Your Deck?
It is not difficult to construct your deck if you have a level, pre-prepared plot of land on which you can lay a straightforward frame and deck boards, and this task is made even simpler if you purchase a deck in the form of a kit. On the other hand, some decks are far more challenging to construct than others, particularly if the land is sloped and they have to be elevated. If you have little to no expertise with do-it-yourself projects, particularly carpentry and landscaping, and if you have an inconvenient plot, you should call a professional handyman at Video Chat a Pro and have them help you build a deck in real-time.