Video Chat with a licensed professional.
Circuit Breaker Keep Tripping | Ask Electrician for Help
Video Chat with a pro now.

Circuit Breaker Keep Tripping | What To Do?

Circuit breakers are switching devices that can be operated either automatically or manually, depending on the user's preference. Controlling and guarding the electrical power system, as well as the electrical devices that are connected to it, are two of their key responsibilities.

The circuit breaker will trip if either an excessive amount of electricity passes through it or it cannot bear the load of the additional current. This indicates that the flow of electricity has been stopped to prevent your circuits from overheating and causing additional damage. House fires would have been extremely common if there were no opportunities for the circuit breakers to trip.

What are the Telltale Signs That a Circuit Breaker Has Tripped?

In most cases, the most obvious evidence that a circuit breaker has been tripped is that the electricity in only a portion of your home loses power rather than the entire home. It's possible that you'll also discover that many outlets in a single area, including a USB electrical outlet, have ceased functioning properly.

If your circuit breaker keeps tripping, you should investigate your home's electrical circuits by going to your residence's electrical panel or fuse box. Be certain that you are familiar with the location of your electrical panel or fuse box and that its aperture can be easily reached and is not obstructed by any furniture, boxes, books, or shelves.

It is a good idea to take the time to figure out each switch or fuse and the area that it controls if your circuit breaker and fuse aren't easily accessible or labeled. Then, if a circuit or fuse trips or blows, you will know which one it is in particular. In sections like the kitchen that could have two circuit breakers or fuses, you need to designate which part of the kitchen is controlled by each switch. If you do so, you will save both time and energy anytime the circuit breaker in your home unexpectedly trips.

The switch handle of a circuit breaker will have moved between the "on" and "off" positions if the breaker trips due to an amperage level higher than its maximum rating. If the circuit breaker tripped, a red area might appear on the screen. However, this is dependent on the electrical panel that you have. When a trip occurs in some panels, it may only result in a slight movement of the handle; in this scenario, you will need to examine the switches very carefully in order to determine which one has been tripped.

How to Repair a Circuit Breaker That Keeps Tripping

Investigate the cause of the problem and make the necessary repairs if your breaker keeps tripping. Here are a few techniques to limit the possibilities. If the problem becomes too complex, you should always consult a qualified electrician.

Disconnect Everything

Determine which part of the house the circuit breaker tripped controls, then turn everything off and disconnect everything in that part of the house. Everything from lights to Microwaves to computers is included. Then you should go and flip the circuit breaker. You are more likely to have a short than an overload if the circuit breaker goes promptly, even though nothing is plugged into it.

If the breaker stays on, you should return to the room and begin plugging everything in and turning them on one at a time if the power is still on. Take a moment to rest between each step, then move on to the next one. You will know you have surpassed your capacity for that circuit when the breaker trips for a second time. If possible, the loads should be redistributed to distribute them more evenly among the circuits.

Check To See Whether There Is A Shortage In A Particular Appliance.

When a hot wire comes into contact with the casing of an appliance or another type of electrical device, the possibility of ground faults and short circuits increases. While checking for an overload, make a mental note of the last object you plugged in before the circuit breaker tripped. When you connect the appliance or item to a different circuit, does that circuit also trip? If this is the case, you should immediately remove the device's power supply and refrain from using it until it has been repaired or replaced.

You should contact an electrician if you find any ground or short issues in the wiring. If the circuit breaker trips shortly after being reset, even though there is nothing connected or turned on, the problem is probably caused by something in your home's wiring. This may be due to a loose connection at a receptacle or another device.

Suppose you have knowledge of electrical systems and can identify the component of the system that is producing the short. In that case, you should either repair the component or secure the loose wire. Call a professional certified electrician if you do not have the necessary knowledge, if you can smell something burning, or if there are scorch marks visible on your walls. Follow the same procedure if you experience issues with lights that flicker or breakers that trip frequently.

Electrical fires and shocks are extremely hazardous, and locating ground faults and short circuits can be challenging. An electrical pro from Video Chat A Pro can diagnose and fix the problem, which can alleviate your anxiety. When dealing with electrical it is best to ask an electrician for help.

Customers reviews
See Reviews of Video Chat A Pro for Home and Auto Repair
They showed up on time and did a good job. Thanks again.
Tom
Video Chat Can Do Plumbing
Great job 👍
Donna
Video Chat Can Do Plumbing
Learn From the Very Best
Learn how to do-it-yourself with Video Chat a Pro! Licensed tradesmen are available 24/7 for video chats to give guidance on any do it yourself repairs or installations.
Whether it’s auto repair, plumbing, HVAC work, appliance repair, electrical repair or irrigation installation. How to DIY with Video Chat a Pro is here to help.
 

Learn More