Install Ceiling Fan | How To Do It?
As more and more homeowners realize the significant energy savings that ceiling fans provide all year round, the popularity of ceiling fans continues to rise. During the warm months, ceiling fans generate refreshing breezes, easing the workload placed on air conditioners. During the colder months, they keep the space warm by circulating air that has been heated. A ceiling fan can be installed in a short amount of time, particularly if the area above the ceiling can be reached from an attic. However, even if it isn't, the task at hand is still very much achievable. You can turn a fan kit into a working fan in less than a day if you break the procedure down into its steps and are familiar with the proper way to work safely with electricity.Prepare to install your fan.
When it comes to do-it-yourself tasks, the most important thing to keep in mind is safety, and this is especially true when dealing with electrical components. After turning off the power to the existing fan or light fixture at the breaker box, use a circuit tester to verify that there is no electricity present in the wires at the location where the installation will take place.After removing the old fan or fixture, check to see that the existing electrical box has a fan rating and is strong enough to hold the additional weight. In the event that it is not, you will need to construct a suitable box in addition to a fan brace in the space between two ceiling joists. When operating, a ceiling fan that is not properly supported poses a significant threat to anyone in the room. This is especially true when the fan is turned on.
Mount your ceiling fan
After the old fan or light fixture has been removed, the existing wire from the fixture that came before it should be seen peeking out of the ceiling hole. Mounting the new fan requires connecting the existing wires through the mounting bracket for the fan and then securing it to the electrical box with the mounting screws provided.You should install your new fan approximately nine feet above the ground for optimal performance. A downrod will be able to assist you in lowering the fan unit if your ceiling is vaulted. If you will be utilizing a downrod, first secure the canopy of the fan to the downrod, and then thread the fan's wires through the downrod. Use the pins and screws that are provided to fasten it to the base of the fan, also known as the motor housing. Using a wire cutter, you should now get rid of any excess wire that is hanging about. After that, use the hanger ball included with the downrod to attach it to the mounting bracket already installed on the ceiling.
Set up the new fan's wiring.
After the downrod has been installed in the bracket so that it is secure, you can next connect the wires in the ceiling to the fan's wiring. The wire covers that are needed to connect the wires should come standard with your new fan. Be sure to examine both the installation manual for the fan as well as the labels that are attached to the wires in the ceiling before attempting to connect the wires that are contained within the fan to the right wires that are located in the ceiling. To expose the wires and prepare them for connection, you might need to utilize a wire stripper.The following are the wires that need to be connected:
- A live wire, denoted by the color black, is connected to the supply wire of the house.
- A ground wire, which is typically colored green and connects to the copper ground wire in the house
- A neutral wire is often white and connects to the neutral wire in the house.
- If your ceiling fan has lights, it will have a striped or blue wire that must be linked with your home's supply wire. If your fan does not have lights, it will only have a solid white wire.
Put the final pieces of your ceiling fan together.
This last step should not to present too much of a challenge for you if the blades on your new fan come with an "easy mount" feature. Install the fan blades following the instructions provided by the manufacturer. This will normally entail screwing a blade mount into the motor housing unit and then either screwing or snapping the fan blades into place on the mount.Per the directions provided by the manufacturer, putting together the various lighting system components is likewise a reasonably simple process. In most cases, the fixture for the light bulbs will be included with the fan and will attach to the mount for the blades. Afterward, affix the light bulbs and the light shades if they come with the fixture.
Restore power to the ceiling fan at the breaker box, and then turn on the unit to check that the fan and lights are operating as expected after you've done so. Your new fan will not only help you maintain a comfortable temperature in your room, but it will also provide adequate ventilation. The good news is that putting in a new ceiling fan is not a difficult process, and after only a few hours of light labor, you will be able to make your room seem either cool or cozy.